Embedded Files
PLA Tough+ (Gray), 0.20 mm layers, 2 walls (3–4 on request), 10–15% infill, supports only where needed.
Typical turnaround 2–4 business days.
Print-Only tiers: S $25 (1 hr) · M $45 (2 hr) · L $65 (4 hr)
Time overage: $15/hr (0.5-hr blocks)
From $120 — includes basic CAD clean‑up (if needed) + initial print + 1 reprint for minor tweaks. Extra reprints $25 each + any time/modifier adders if applicable.
From $60 (1–3 parts) — final price based on time estimate and any modifiers.
Capacity & rush: Rush (<2 business days) +25–40% depending on queue.
Options (on request): High-detail +30% · Extra walls +$5/+$10 · High-density infill +$10/+ $20 (>60% custom) · Support-heavy +$10
Finish: support nubs trimmed; no sanding/painting.
Policies:
Policies:
Minimum job: $25
Multi-part (identical): 3–5 pcs –10%, 6–10 pcs –15%, >10 = quote
Design/Prep (advanced only): Operator time $25/hr (15-min increments) if we go beyond standard prep (we confirm first)
Client-supplied PLA: $5 handling (unopened 1.75 mm)
Reprints: Our error = free; model/setting changes after approval → new quote
Quality scope: Draft-fit; typical tolerance ±0.3 mm (XY), ±0.4–0.6 mm (Z)
Delivery/Shipping: Local delivery fees above; shipping = packaging $3 + carrier at cost; no on-site pickups
Cancellation: Before printing → no charge; after start → time/materials to date
Material: PLA Tough+ (Gray) only • Max 180×180×180 mm • Draft-fit; no sanding/painting. Warping/failure in hot cars, outdoors, solvent exposure.
Page updated
Google Sites
Report abuse